Even pursuant to the standard, some types of helmets still cannot promote the maximum use as stated in the regulations.
According to the regulation, the basic structure of the helmet consists of 3 parts: the bark cover; the shock absorbent and the straps. The hard shell of the helmet which is usually made of plastic or composite materials (ABS, EPS ...), is designed to disperse impact force out tracks and avoid focusing resources on a regional damage of the skull. The helmet having the sound shell and the smooth surface will make a better first pad in case the victim stayed away or was smashed against the pavement. By this time, the victim is easily slipped off at first. In addition, the easy-to-peel luminous painted helmet was discovered to wear at the night riding to help to reduce the accidents due to poor visibility.
The riders of motorcycles, scooters, mopeds need to check the windscreen, baseball, straps and buckles carefully before riding. When tightening straps, you should wear a helmet with the key caps on the chin. It is obvious that you will easily be injured without a helmet while you are jet skiing, motorcycling or biking but an accident occur. However, if you improperly fasten the helmet without caps, it still is dangerous. This fact is true for all ages, including children. Please visit this website to read more about the proper way of using a helmet
Please follow these steps to use your helmet in the right and safe way:
1. Open the 2 sides of the helmet straps, remove the helmet on your head and check whether the caps are just started or not. If the helmet is too large compared to your head, please change it.
2. You should always wear a fastened helmet because there would be no protective effect from the helmet if you did not fasten it. But do not set too tight or too loose. If the straps are installed too tight, it will make you feel uncomfortable.
How to do hygiene and cleaning your helmet properly
Our helmets are used every day so it will cause the discomfort feeling such as odor, itchy scalp, hair plastered, etc. if you do not perform sanitation for them after a long time of usage. Below are some simple steps to guide you the proper hygiene and cleaning instructions for your helmet. You can further instructions and guidance.
- Step 1: You have to learn how to take apart the parts on your helmet when buying it.
- Step 2: Remove the detachable parts of the helmet (glass, nose protected part, cheeks buffer)
- Step 3: Let the shampoo out brass and dissolve in water. You should use a shampoo, it will be good for health and for your helmet, avoid those with more detergents such as dishwashing liquid, laundry soap.
- Step 4: Put a towel into the helmet to reduce dust
- Step 5: Soak the helmet in the soapy water to remove dirt which stuck from the inside layer renders
- Step 6: Use your fingers to lightly squeeze the foam inside the helmet parts so the soap can take effect
- Step 7: Rinse the helmet with clear water
- Step 8: Exposure the drain helmet in a dry place and sun before re-using.